2012 ©
             ข้อมูลการเผยแพร่ผลงาน
การเผยแพร่ในรูปของบทความวารสารทางวิชาการ
ชื่อบทความ Microstructures and hardness of A356-SiC composites produced by the mechanical stir casting 
วัน/เดือน/ปี ที่ได้ตอบรับ 7 มิถุนายน 2560 
วารสาร
     ชื่อวารสาร Materials Today: Proceedings 
     มาตรฐานของวารสาร SCOPUS 
     หน่วยงานเจ้าของวารสาร elsevier 
     ISBN/ISSN  
     ปีที่  
     ฉบับที่
     เดือน กรกฎาคม-กันยายน
     ปี พ.ศ. ที่พิมพ์ 2562 
     หน้า 9489-9496 
     บทคัดย่อ The present research was aimed to investigate the carbide distribution and hardness in A356-SiC composite produced by stir casting. The particle size of reinforcingphase was 37 m silicon carbide with loading content of 5, 10, 15 and 20 percent by weight. In the casting process, molten composite was stirred by the rotor blades with a stirring speed of 300 rpm. Molten A356 was continuously stirred during cooling from superheated liquid state to a semi-solidtemperature of 615°C. During stirring the SiC powder was slowly added into the melt and continuouslystirred for another 15 min. The melt was then poured into a stainless mold at the pouring temperature of 680°C. The results showed that silicon carbide was uniformly distributed in the A356 in all conditions. SEM micrographs showed that the interface between the matrix and reinforced particles of 5, 10 and 15percent SiC exhibited well bonding. However, at a composition of 20 percent SiC by weight, small cracks were found at the interface between a reinforced phase and the matrix phase. Hardness values of composite material of 5, 10, 15 and 20 percent were 69.87, 71.09, 74.05 and 71.01 HB, respectively.  
     คำสำคัญ Aluminium matrix composite; stir casting; reinforcedparticles; A356-SiC; hardness  
ผู้เขียน
577040016-2 นาย ภูริพัส แสนพงษ์ [ผู้เขียนหลัก]
คณะวิศวกรรมศาสตร์ ปริญญาเอก ภาคปกติ

การประเมินบทความ มีผู้ประเมินอิสระ 
สถานภาพการเผยแพร่ ตีพิมพ์แล้ว 
วารสารมีการเผยแพร่ในระดับ นานาชาติ 
citation มี 
เป็นส่วนหนึ่งของวิทยานิพนธ์ เป็น 
แนบไฟล์
Citation 0