| Research Title |
Effect of Die Shift on Curvature of Micro-Extruded Pins |
| Date of Distribution |
28 March 2017 |
| Conference |
| Title of the Conference |
2017 World Congress on Micro and Nano Manufacturing |
| Organiser |
ICOMM/4M/IFMM |
| Conference Place |
Garden Villa |
| Province/State |
Kaohsiung City, Taiwan |
| Conference Date |
27 March 2017 |
| To |
30 March 2017 |
| Proceeding Paper |
| Volume |
2017 |
| Issue |
1 |
| Page |
63-66 |
| Editors/edition/publisher |
Yunn-Shiun Liao, Albet J. Shih and Chiu-Feng Lin / First Edition / WCMNM 2017 Organisers |
| Abstract |
This paper investigated the effect of die shift to the bending tendency or curvature of micro-extruded pins by using finite element simulation. By considering the original die setup, the die shift lengths were varied from 0.0 mm 0.2 mm. In order to observe the effect of the die shift at higher lengths, the opening part of the die was cut open to leave room for the curvature of micro-extruded pins and the die shift lengths were extended up to 1.4 mm. After the micro-extrusion simulation, the curvature radii of the micro-extruded pins were measured. The results showed that the increased in die shift length led to the decrease in curvature radii of the micro-extruded pins. Particularly during the initial increase in die shift length, the curvature radii dramatically decreased. As a result, die shift should be avoided at the beginning of the micro-extrusion in order to reduce bending tendency of micro-extruded pins. |
| Author |
|
| Peer Review Status |
มีผู้ประเมินอิสระ |
| Level of Conference |
นานาชาติ |
| Type of Proceeding |
Full paper |
| Type of Presentation |
Oral |
| Part of thesis |
true |
| Presentation awarding |
false |
| Attach file |
|
| Citation |
0
|
|
|
Publication
Journal Publication
ไทย