| Title of Article |
Effects of Number of Inserts and Insert Materials on Surface Roughness of Cast-Iron Work Produced by Face Milling |
| Date of Acceptance |
27 June 2014 |
| Journal |
| Title of Journal |
Advanced Materials Research |
| Standard |
SCOPUS |
| Institute of Journal |
Scientific.Net is a registered brand of Trans Tech Publications Inc. |
| ISBN/ISSN |
1662-8985 |
| Volume |
|
| Issue |
1016 |
| Month |
สิงหาคม |
| Year of Publication |
2018 |
| Page |
135-139 |
| Abstract |
In this work, the effects of two key factors of face milling including the number of inserts and insert material on surface roughness of cast-iron turbine housing work were systematically studied using full factorial designed experiments. Three insert materials including uncoated cemented carbide (TH10), commercial TiAlN/TiN coated cemented carbide (AH120) and tungsten carbo-nitride (WCN) coated cemented carbide were selected while the number of inserts was varied from 1 to 3 in this study. The results showed that both factors were statistically significant and the optimal parameters that yielded minimum Ra-value of 0.495 μm were the commercial TiAlN/TiN coated cemented carbide material (AH120) and three inserts. |
| Keyword |
number of inserts, surface roughness, face milling, full factorial designed |
| Author |
|
| Reviewing Status |
มีผู้ประเมินอิสระ |
| Status |
ตีพิมพ์แล้ว |
| Level of Publication |
นานาชาติ |
| citation |
false |
| Part of thesis |
true |
| ใช้สำหรับสำเร็จการศึกษา |
ไม่เป็น |
| Attach file |
|
| Citation |
0
|
|
|
Publication
Journal Publication
ไทย