| Research Title |
Tribological Characteristics of Non-Chlorinated Metalworking Fluid in Stainless Steel Deep Drawing |
| Date of Distribution |
13 May 2020 |
| Conference |
| Title of the Conference |
ME-NETT 28th |
| Organiser |
Thai Society of Mechanical Engineers |
| Conference Place |
โรงแรม |
| Province/State |
โรงแรม Pullman Khon Kaen Raja Orchid ขอนแก่น |
| Conference Date |
15 October 2014 |
| To |
16 October 2014 |
| Proceeding Paper |
| Volume |
28 |
| Issue |
1 |
| Page |
303 |
| Editors/edition/publisher |
28 |
| Abstract |
This study was experimentally carried out to observe the tribological performance of the nonchlorinated lubricant in stainless steel deep drawing. This specially formulated lubricant with no chlorine
additive was compared with the one having chlorine additive in the strip drawing test. The tool and sheet
materials were SKD11 and AISI 304, respectively. The contact pressure, sliding velocity, and bending
angle were varied to determine the differences in the friction coefficients and amounts of wear occurring
on the die surfaces. The results showed that the friction coefficients of the non-chlorinated lubricant were
close to those of the chlorinated lubricant at 9.375 MPa contact pressure, 10 mm/min sliding velocity, and
0º bending angle. The results obtained from this study could be used to formulate new alternative
lubricants and select suitable conditions in stainless steels deep drawing |
| Author |
|
| Peer Review Status |
มีผู้ประเมินอิสระ |
| Level of Conference |
ชาติ |
| Type of Proceeding |
Full paper |
| Type of Presentation |
Oral |
| Part of thesis |
true |
| Presentation awarding |
false |
| Attach file |
|
| Citation |
0
|
|
|
Publication
Journal Publication
ไทย