2012 ©
             ข้อมูลการเผยแพร่ผลงาน
การเผยแพร่ในรูปของบทความวารสารทางวิชาการ
ชื่อบทความที่เผยแพร่ Characterisation of coconut jelly pellets made from solid waste of ready-to-drink industry 
วัน/เดือน/ปี ที่เผยแพร่ 29 ตุลาคม 2563 
การประชุม
     ชื่อการประชุม The 9th Joint Conference on Renewable Energy and Nanotechnology, JCREN 2020 
     หน่วยงาน/องค์กรที่จัดประชุม คณะวิศวกรรมศาสตร์ มหาวิทยาลัยขอนแก่น 
     สถานที่จัดประชุม มหาวิทยาลัยขอนแก่น 
     จังหวัด/รัฐ ขอนแก่น 
     ช่วงวันที่จัดประชุม 28 ตุลาคม 2563 
     ถึง 29 ตุลาคม 2563 
Proceeding Paper
     Volume (ปีที่)
     Issue (เล่มที่)
     หน้าที่พิมพ์ 14 
     Editors/edition/publisher  
     บทคัดย่อ Coconut jelly, the solid waste from ready-to-drink industry, was used to produce solid fuel pellets. The pellet forming was done by a single 10-ton hydraulic press unit without any binders. The characteristics of the pelletized fuel including diameter, length, bulk density, pellet density, proximate analysis, heating value, energy density, combustion rate, heat release rate, compressive strength and durability were investigated. The result showed that pellets had average diameter and length of 10 mm. The pelleting could significantly improve the bulk density from 30 kg/m3 of original form and 70 kg/m3 of grinded form to 659 kg/m3. Proximate analysis values of pellets (moisture 8.05 wt%, ash 2.06 wt%, volatile matters 77.04 wt% and fixed carbon 12.85 wt%) indicated good combustion parameters. The heating value of pellets was 15,995 kJ/kg which increased by 19.05% from its original form. Pellet density was 1,100 kg/m3 and then resulting in energy density of 17.59103 MJ/m3. The fuel pellets also increased combustion rate and heat release rate from 0.05 to 0.17 g/min and 672 to 2,719 J/min, respectively, when compared with its original form. The pellet had the high durability (98 wt%) and high compressive strength in horizontal direction (484 N/cm2). Overall, the properties of coconut jelly pellets meet the requirements of Thailand and European standards of the pellet properties for non-woody materials. Thus, coconut jelly waste could be considered as a potential raw material to manufacture pellets as an alternative energy source. 
ผู้เขียน
635040070-8 น.ส. สุคลภัทร แท่นพรหม [ผู้เขียนหลัก]
คณะวิศวกรรมศาสตร์ ปริญญาโท ภาคปกติ

การประเมินบทความ (Peer Review) มีผู้ประเมินอิสระ 
มีการเผยแพร่ในระดับ นานาชาติ 
รูปแบบ Proceeding Abstract 
รูปแบบการนำเสนอ Oral 
เป็นส่วนหนึ่งของวิทยานิพนธ์ เป็น 
ผลงานที่นำเสนอได้รับรางวัล ไม่ได้รับรางวัล 
แนบไฟล์
Citation 0