ชื่อบทความ |
Improving Properties of Modified Silica by Admicellar Polymerization Technique for Inner Rubber Tube Products |
วัน/เดือน/ปี ที่ได้ตอบรับ |
6 พฤษภาคม 2564 |
วารสาร |
ชื่อวารสาร |
Asia-Pacific Journal of Science and Technology |
มาตรฐานของวารสาร |
SCOPUS |
หน่วยงานเจ้าของวารสาร |
Khonkaen University |
ISBN/ISSN |
ISSN 2539-6293 |
ปีที่ |
2021 |
ฉบับที่ |
Vol. 26 No.04 |
เดือน |
Oct - dec |
ปี พ.ศ. ที่พิมพ์ |
2564 |
หน้า |
|
บทคัดย่อ |
Modified silica using admicellar polymerization technique (APT) has shown to effectively reinforce natural rubber products. The study has shown that reinforcing natural rubber with APT-modified silica at the 40 phr yields excellent mechanical and ozone aging resistant properties. For the 40 phr sample, the cure time was found to be 138.23 ± 1.06 s. The tensile strength, the 300% modulus and the tear strength were 21.55 ± 0.40 MPa, 4.62 ± 0.17 MPa and 73.67 ± 1.58 MPa, respectively. The elongation at break was measured to be 579.96 ± 6.70%. The hardness was 55.33 ± 1.15 shore A. These surpass the standard values for motorcycle and bicycle rubber inner tube products, according to the Thai Industrial Standard TIS 683-2530 and TIS 652-2529. Scanning electron microscopy studies revealed that their outstanding mechanical properties were related to the better adhesion between the silica particles and the rubber matrix, resulting from the thermal admicellar polymerization process. The minimal cracks observed after the ozone aging resistance test also suggest high durability. |
คำสำคัญ |
Admicellar polymerization, Inner rubber tube, Silica. |
ผู้เขียน |
|
การประเมินบทความ |
มีผู้ประเมินอิสระ |
สถานภาพการเผยแพร่ |
ตีพิมพ์แล้ว |
วารสารมีการเผยแพร่ในระดับ |
นานาชาติ |
citation |
มี |
เป็นส่วนหนึ่งของวิทยานิพนธ์ |
เป็น |
แนบไฟล์ |
|
Citation |
0
|
|