2012 ©
             ข้อมูลการเผยแพร่ผลงาน
การเผยแพร่ในรูปของบทความวารสารทางวิชาการ
ชื่อบทความ Surface Roughness of Aluminum Oxide Thin Films Deposited by DC and RF Reactive Magnetron Sputtering  
วัน/เดือน/ปี ที่ได้ตอบรับ 13 มิถุนายน 2561 
วารสาร
     ชื่อวารสาร Materials Today: Proceedings 
     มาตรฐานของวารสาร SCOPUS 
     หน่วยงานเจ้าของวารสาร Materials Today 
     ISBN/ISSN  
     ปีที่ 2017 
     ฉบับที่
     เดือน
     ปี พ.ศ. ที่พิมพ์ 2561 
     หน้า 15228-15232 
     บทคัดย่อ Aluminum oxide thin films produced by reactive sputtering processes are widely used in optical and microelectronic applications. This work investigates the dependency of the films’ surface roughness (Ra) on the operating pressure, the sputtering power and the deposition technique. Amorphous aluminum oxide thin films were grown on silicon (100) wafers by the DC and RF reactive magnetron sputtering deposition processes. In this experiment, high purity Al target (99.999%) was used. The operating pressures were set to 3, 5 and 10 mTorr. The sputtering powers were adjusted to 150 W and 300 W. Oxygen was injected into the chamber to react with sputtered Al atoms and formed aluminum oxide. For DC reactive magnetron sputtering, it was found that the surface roughness increased with increasing operating pressure. For the sputtering power of 300 W, the surface roughness increased from 1.03 nm to 2.17 nm as the operating pressure changed from 3 mTorr to 10 mTorr, respectively. It was also found that lower sputtering power resulted in smoother films. At 150 W sputtering power and 3 mTorr operating pressure, the Ra value was measured to be 0.81 nm. Higher operating pressure and sputtering power resulted in higher rates of particle collisions and scatterings. This reduced energies of sputtered atoms, preventing them to form dense and smooth films. The film deposited by the RF reactive magnetron sputtering yielded the lowest Ra value. At 150 W sputtering power and 3 mTorr operating pressure, the Ra value of the film was found to be 0.49 nm.  
     คำสำคัญ Aluminum oxide; Thin films; Surface roughness; Sputtering  
ผู้เขียน
597040029-5 น.ส. ฉัตรปวีณ์ หอมอ่อน [ผู้เขียนหลัก]
คณะวิศวกรรมศาสตร์ ปริญญาเอก ภาคปกติ

การประเมินบทความ มีผู้ประเมินอิสระ 
สถานภาพการเผยแพร่ ตีพิมพ์แล้ว 
วารสารมีการเผยแพร่ในระดับ นานาชาติ 
citation มี 
เป็นส่วนหนึ่งของวิทยานิพนธ์ เป็น 
แนบไฟล์
Citation 0