2012 ©
             ข้อมูลการเผยแพร่ผลงาน
การเผยแพร่ในรูปของบทความวารสารทางวิชาการ
ชื่อบทความที่เผยแพร่ NOVEL CUBIC HETEROJUNCTION Fe2O3/ZnO COMPOSITE FOR THE PHOTOCATALYST APPLICATION 
วัน/เดือน/ปี ที่เผยแพร่ 3 สิงหาคม 2565 
การประชุม
     ชื่อการประชุม International conference on advanced materials in environment, energy and health applications-AMEEHA 2022 
     หน่วยงาน/องค์กรที่จัดประชุม Department of Chemical Engineering, Khon Kaen University, Thailand and Department of Environmental Sciences, JSS Academy of Higher Education and Research, India. 
     สถานที่จัดประชุม Pathumwan Princess Hotel 
     จังหวัด/รัฐ Bangkok, Thailand 
     ช่วงวันที่จัดประชุม 3 สิงหาคม 2565 
     ถึง 5 สิงหาคม 2565 
Proceeding Paper
     Volume (ปีที่) 2022 
     Issue (เล่มที่)
     หน้าที่พิมพ์ 13 
     Editors/edition/publisher P. Hemnil, Y. Prapawasit, T. Wongwuttanasatian, V. Seithtanabutara 
     บทคัดย่อ In recent years’ metal oxides based composite materials have been widely examined as photoelectrode for dyesensitized solar cells (DSSC) [1-2]. Among that zinc oxide (ZnO), ferric oxide (Fe2O3), titanium dioxide (TiO2), and magnetite (Fe3O4) based photocatalysts are gained high attention owing to their non-toxic, environmentally friendly, and higher energy conversion [1]. Comparatively, ZnO and Fe2O3 have higher band gap energy (3.37 eV and 2.1 eV) equivalent to TiO2, efficient light absorption capability of the visible range, and degradation of Victoria blue dye . under UV light [3]. On the other hand, it is chemically stable in aqueous substance, low cost, and abundant in nature [4-5]. In this study, Fe2O3/ZnO is synthesized using Hydrothermal-calcination (HTC) and Hydrothermal method (HT) to find the physicochemical structure and photo activity. For the HTC method, Fe2O3 is undergone for a conventional hydrothermal reaction using Fe(NO3)3.9H2O, Na3C6H5O7, and urea as chemical substances and blended with pure commercial ZnO. Following that calcination process at 400 °C for 1 hour to obtain the HTC- Fe2O3/ZnO samples. For HT method, FeCl3, 6H2O, absolute ethanol, and NaAc are blended and heated at 190 °C for 24 hours. Following that washing and drying process is performed to obtain the HT- Fe2O3/ZnO. From XRD pattern, it is found that the phase and crystallography of ZnO are consistent with the existing study [1]. Figure 1 (a) depicts the hybrid structural relationship between Fe2O3 and ZnO with a peak intensity for HTCFe2O3/ZnO than HT- Fe2O3/ZnO. Following that FTIR spectra obtain a similar peak for HTC- Fe2O3/ZnO and HTFe2O3/ZnO which shares a functional group of Fe2O3 and ZnO as shown in Figure 1 (b). TGA depicts a weight loss peak of -0.09 %wt./min and -0.34 %wt./min at 236°C and 634°C, respectively for HTC- Fe2O3/ZnO composition as shown in Figure 1 (c). Advantageously, HT- Fe2O3/ZnO attained a single weight loss peak of -0.22 %wt./min at 514°C. It reveals that HT- Fe2O3/ZnO is thermally stable than HTC- Fe2O3/ZnO composite at a temperature higher than 650°C. Fig 2(a) shows the UV-VIS absorbance spectra for the prepared samples, it is found that commercial nano HTC-Fe2O3/ZnO composite attained isotherm type III and type IV while HT-Fe2O3/ZnO achieved only isotherm type IV as shown in Figures 2 (b) and 2 (c). Higher specific surface area (34.855 m2 /g) and smaller pore size (8.543 nm) are noted for HT-Fe2O3/ZnO than HTC-Fe2O3/ZnO. The inset image of Figure 2 (b) shows the ZnO particles spread over the surface of HT-Fe2O3 and the inset image of Figure 2 (c) shows the cube-shaped Fe2O3 particles with a size of around 50-70 nm covered by some traces of ZnO. It is found that HT-Fe2O3/ZnO composite achieved a higher amount of Fe than HTC-Fe2O3/ZnO composite however Zn and O are less. It concludes that a novel cubic heterojunction HT-Fe2O3/ZnO composite achieved a low energy band gap and high thermal stability. 
ผู้เขียน
635040078-2 นาย ภูริณัฐ เหมนิล [ผู้เขียนหลัก]
คณะวิศวกรรมศาสตร์ ปริญญาโท โครงการพิเศษ

การประเมินบทความ (Peer Review) ไม่มีผู้ประเมินอิสระ 
มีการเผยแพร่ในระดับ นานาชาติ 
รูปแบบ Proceeding Abstract 
รูปแบบการนำเสนอ Oral 
เป็นส่วนหนึ่งของวิทยานิพนธ์ เป็น 
ผลงานที่นำเสนอได้รับรางวัล ไม่ได้รับรางวัล 
แนบไฟล์
Citation 0