|
Publication
|
Title of Article |
Comparing Efficiency between Dual and Single-Axis Vertical Turbine for Electrical Generating System |
Date of Acceptance |
29 May 2023 |
Journal |
Title of Journal |
Naresuan University Journal : Journal for Science and Technology (NUJST) |
Standard |
TCI |
Institute of Journal |
Naresuan University. |
ISBN/ISSN |
ISSN: 0858-7418; EISSN: 2539-553X |
Volume |
|
Issue |
|
Month |
|
Year of Publication |
2023 |
Page |
|
Abstract |
This article reports an efficient comparison between 500W dual and single vertical axis cross-flow turbine for electrical generating systems. The studied parameters were the influence of the distance between dual vertical axes, then, comparing the efficiency with the single cross-flow turbine. From the designation of the L/D ratio as equal to 1, the diameter and height of the dual-axis vertical turbine was 0.3 m while the single-axis vertical turbine was 0.6 m. A chain was used for power transmission with a gear ratio of 1:18 and an induction generator was used as the electrical generating system. The results were that a dual-axis vertical turbine with a 0.8 m water head and at various distances of 3, 6, 9 and 12 cm had an efficiency of 32.36, 28.06, 20.44, and 14.44%, respectively. However, the efficiency decreased with increasing distance between the axes which resulted in a loss of water energy flowing through the axes. The water energy loss was variously 74, 150, 243 and 364 W. In the case of the single-axis vertical turbine, the efficiency was 20.73% which was closes to the dual-axis vertical turbine at a distance of 9 cm. The economic viability of dual-axis vertical turbines is 6.5 years but is 14.77 years for single-axis vertical turbines. |
Keyword |
vertical turbine, cross-flow turbine, electrical generating system |
Author |
|
Reviewing Status |
มีผู้ประเมินอิสระ |
Status |
ได้รับการตอบรับให้ตีพิมพ์ |
Level of Publication |
นานาชาติ |
citation |
false |
Part of thesis |
true |
Attach file |
|
Citation |
0
|
|
|
|
|
|
|