2012 ©
             ข้อมูลการเผยแพร่ผลงาน
การเผยแพร่ในรูปของบทความวารสารทางวิชาการ
ชื่อบทความที่เผยแพร่ "Effect of sintering protocol on mechanical characterization upon aging of multilayer monolithic zirconia" 
วัน/เดือน/ปี ที่เผยแพร่ 6 มิถุนายน 2567 
การประชุม
     ชื่อการประชุม International Conference on Integrated Science Bioscience and Bioinnovation for Sustainability and Forensic Science 2024 (BBFS2024) 
     หน่วยงาน/องค์กรที่จัดประชุม Khonkaen University 
     สถานที่จัดประชุม Khonkaen University 
     จังหวัด/รัฐ Thailand 
     ช่วงวันที่จัดประชุม 6 มิถุนายน 2567 
     ถึง 7 มิถุนายน 2567 
Proceeding Paper
     Volume (ปีที่)
     Issue (เล่มที่)
     หน้าที่พิมพ์ 37-49 
     Editors/edition/publisher  
     บทคัดย่อ Background: sintering parameters were influenced to mechanical characteristics of dental restoration. This study investigated the effect of different sintering protocol on flexural strength of four multilayer monolithic zirconia materials. Material and Methods: 360 bar specimens (width x length x thickness = 2 x 25 x 12 mm) were prepared from 3Y-TZP (super translucent multilayer zirconia, Boomden, China), 4Y-PSZ (super translucent plus multilayer zirconia, Boomden, China), 5 Y-PSZ (ultra-translucent multilayer zirconia, Boomden, China) and combined 3Y+4Y+5Y PSZ (3D pro multilayer zirconia, Boomden, China). Each material was randomly divided into three groups of sintering protocols (n = 30/group): regular (R = manufacturing temperature and time), speed (S = temperature R + 50°C, time R – 40 minutes), high speed (H = temperature R + 100°C, time R – 80 minutes). After the sintering, 180 specimens were aged by a thermocycling device (CWB332R, MERL, KMIT’L, Thailand) for 50,000 cycles in a coffee solution between 5°C and 55°C. Induced pre-cracks on the tension side and mechanical characteristics were defined by a four-point bending test for flexural strength (). Statistical Analysis: Three-way ANOVA and Bonferroni multiple comparisons were applied to determine the significant differences of  at p < 0.05. SEM was used for evaluating the grain size, and X-ray diffraction (XRD) was used to determine the number of tetragonal and monoclinic phases. Result: The mean  standard deviation of  and 0 was highest in the STAH group (887.34 ± 30.15 and 939.03), whereas the lowest was the UTNR group (253.1 ± 11.58 and 271.47). There was a significant difference in the flexural strength value of the different materials, sintering protocol, interaction between the material and sintering protocol and interaction of materials and ageing (p < 0.05). Conclusion: The sintering protocol of zirconia at a speed and super-speed sintering protocol can increase flexural strength, while the ageing process does not significantly affect flexural strength. Keywords: multilayer zirconia, monolithic zirconia, sintering temperature, sintering time, flexural strength  
ผู้เขียน
645130021-1 น.ส. เสาวลักษณ์ ตรีสงฆ์ [ผู้เขียนหลัก]
คณะทันตแพทยศาสตร์ ปริญญาโท ภาคปกติ นานาชาติ

การประเมินบทความ (Peer Review) มีผู้ประเมินอิสระ 
มีการเผยแพร่ในระดับ นานาชาติ 
รูปแบบ Proceeding Full paper 
รูปแบบการนำเสนอ Oral 
เป็นส่วนหนึ่งของวิทยานิพนธ์ เป็น 
ใช้สำหรับสำเร็จการศึกษา ไม่เป็น 
ผลงานที่นำเสนอได้รับรางวัล ได้รับรางวัล 
     ชื่อรางวัล Silver Oral Presentation Award 
     ประเภทรางวัล รางวัลด้านวิชาการ วิชาชีพ 
     หน่วยงาน/องค์กรที่มอบรางวัล Khonkaen University 
     วัน/เดือน/ปี ทีด้รับรางวัล 6 มิถุนายน 2567 
แนบไฟล์
Citation 0

<
forum