2012 ©
             ข้อมูลการเผยแพร่ผลงาน
การเผยแพร่ในรูปของบทความวารสารทางวิชาการ
ชื่อบทความ The Effect of Tartaric Acid and Citric Acid as a Complexing Agent on Defect Structure and Conductivity of Copper Samarium Co-Doped Ceria Prepared by a Sol-Gel Auto-Combustion Method 
วัน/เดือน/ปี ที่ได้ตอบรับ 21 มิถุนายน 2564 
วารสาร
     ชื่อวารสาร Advances in Materials Science and Engineering 
     มาตรฐานของวารสาร SCOPUS 
     หน่วยงานเจ้าของวารสาร Hindawi 
     ISBN/ISSN  
     ปีที่  
     ฉบับที่ 2021 
     เดือน
     ปี พ.ศ. ที่พิมพ์ 2564 
     หน้า  
     บทคัดย่อ Copper samarium co-doped ceria (CSDC) (Cu0.01Sm0.19Ce0.80O2−δ) nanoparticles were synthesized via a sol-gel auto-combustion of metal nitrates without a complexing agent (DI) and with tartaric acid (TA) or citric acid (CA). The solid oxide formation of CSDC/DI corresponds to the endothermic stage, whereas that of CSDC/TA and CSDC/CA matches the exothermic stage caused by the decomposition of the metal cross-linking and carbon combustion. The cross-linking occurs more extensively in the CA case as more heat is released in CA than in the TA route. The as-synthesized morphology of CSDC/DI reveals both layered structures and small agglomerated particles, whereas CSDC/TA and CSDC/CA show dense xerogel and porous xerogel, respectively. The cubic fluorite structure for calcined CSDCs was confirmed by XRD. From Raman analysis, calcined CSDC/CA has the lowest amount of copper segregation and the highest relative total oxygen vacancy concentration [Vo]total, whereas calcined CSDC/DI has the highest amount of copper segregation and the lowest [Vo]total. For all samples, copper segregation promotes densification, albeit to varying degrees. The relative densities of CSDC/DI, CSDC/TA, and CSDC/CA pellets are 82.8 ± 2.4%, 95.5 ± 1.8%, and 97.8 ± 0.9%, respectively. The sintered CSDC/DI has the lowest density because some copper segregates and liquid copper in interparticle spaces could evaporate earlier than samples containing a complexing agent, whereas sintered CSDC/CA has the highest density because Cu could slowly diffuse from the Cu-Sm-Ce solid solution to grain boundary regions and then precipitate as CuO. The specific grain boundary conductivity is predominantly influenced by CuO along grain boundaries, which reduces specific grain boundary conductivity and increases the enthalpy of association (ΔHa) at 250–350°C; however, it rarely impacts total grain boundary conductivity at temperatures higher than 400°C. CSDC/CA has slightly higher total conductivity than CSDC/TA despite having more CuO segregation because it has higher density and Vo. 
     คำสำคัญ Copper samarium co-doped ceria, SOFC, Electrolyte, Tataric acid, Citric acid, Combustion, Conductivity 
ผู้เขียน
577020034-2 นาย กรวิชญ์ ดวงสา [ผู้เขียนหลัก]
คณะวิทยาศาสตร์ ปริญญาเอก ภาคปกติ

การประเมินบทความ มีผู้ประเมินอิสระ 
สถานภาพการเผยแพร่ ตีพิมพ์แล้ว 
วารสารมีการเผยแพร่ในระดับ นานาชาติ 
citation ไม่มี 
เป็นส่วนหนึ่งของวิทยานิพนธ์ เป็น 
แนบไฟล์
Citation 0