| Title of Article |
Modeling and Simulation of Straw Collector using Finite Element Method |
| Date of Acceptance |
14 April 2020 |
| Journal |
| Title of Journal |
The Mahasarakham International Journal of Engineering Technology |
| Standard |
TCI |
| Institute of Journal |
The Faculty of Engineering, Mahasarakham University |
| ISBN/ISSN |
|
| Volume |
06 |
| Issue |
02 |
| Month |
July-December |
| Year of Publication |
2020 |
| Page |
75-79 |
| Abstract |
The aim of this paper is to determine a suitable structural size of a straw collector. Modeling, simulation and diagnosis were done by using the SolidWorks software.The test was operated in the environment of KhonKaen province which has the maximum soil stress of 240 kPa at the moisture content of 2 percent (the worst condition). The optimum design was done by varying the size of round bars and thickness of equal angle steels in the rake part. The result was defined by operating the finite element method while performing the SolidWorks Simulation. The appropriate size of the round bar and equal angle steel was found to be 10 mm for the diameter of round bars and 3 mm for the thickness of equal angle steels. |
| Keyword |
Straw bale, Straw collector, Rake, SolidWorks Simulation, Finite element method |
| Author |
|
| Reviewing Status |
มีผู้ประเมินอิสระ |
| Status |
ได้รับการตอบรับให้ตีพิมพ์ |
| Level of Publication |
ชาติ |
| citation |
true |
| Part of thesis |
true |
| Attach file |
|
| Citation |
0
|
|
|
Publication
Journal Publication
ไทย