ชื่อบทความที่เผยแพร่ |
Valorization of bioplastic through chemical process toward for biodiesel production |
วัน/เดือน/ปี ที่เผยแพร่ |
12 พฤษภาคม 2564 |
การประชุม |
ชื่อการประชุม |
Proceeding of the 7th KKU International Engineering Conference 2021 |
หน่วยงาน/องค์กรที่จัดประชุม |
Faculty of Engineering, Khon Kaen University, Khon Kaen, Thailand |
สถานที่จัดประชุม |
Online Conference |
จังหวัด/รัฐ |
Khon Kaen |
ช่วงวันที่จัดประชุม |
12 พฤษภาคม 2564 |
ถึง |
14 พฤษภาคม 2564 |
Proceeding Paper |
Volume (ปีที่) |
2021 |
Issue (เล่มที่) |
7 |
หน้าที่พิมพ์ |
118-123 |
Editors/edition/publisher |
Sujin Bureerat |
บทคัดย่อ |
Polyhydroxyalkanoates (PHA) is a bioplastic, which can be used as feedstock for biofuel production. The liquid
biofuel derived from PHA, is in form of fatty acid methyl esters (FAMEs) or biodiesel, named as hydroxyalkanoate
methyl ester (HAME). In this work, PHA was converted into HAME via acid-catalysed esterification reaction. The
esterification reaction was optimized by variations of reaction time (10-60h), concentration of acid catalyst
(5-15%v/v), solvent concentration (50-150 mL) and type of acidic catalysts (H2SO4, HCl and CH3COOH). The
results showed that optimal condition for HAME production was 150 mL methanol concentration, 15% v/v catalyst
loading, 67˚C reaction temperature, 40 h reaction time and HCl was the most effective catalyst for biodiesel
production. The highest yield of HAME (95.05%) was obtained under optimal conditions. The Characterization of
HAME was conducted according to the ASTM standard. The fuel properties of HAME including specific gravity
(D1289), Density at 20 ℃ (D1289) and molecular mass were 1.01, 1.01 g/cm3 and 3.5-4.3×105 g/mol respectively. Almost fuel properties met the ASTM standard. |
ผู้เขียน |
|
การประเมินบทความ (Peer Review) |
ไม่มีผู้ประเมินอิสระ |
มีการเผยแพร่ในระดับ |
นานาชาติ |
รูปแบบ Proceeding |
Full paper |
รูปแบบการนำเสนอ |
Oral |
เป็นส่วนหนึ่งของวิทยานิพนธ์ |
เป็น |
ผลงานที่นำเสนอได้รับรางวัล |
ไม่ได้รับรางวัล |
แนบไฟล์ |
|
Citation |
0
|
|